ONBOARD OIL CHANGE SYSTEMS

Fleet fluid Maintenance that is Safer, Cleaner and Faster

For a lot of fleets, routine maintenance has become anything but routine. Keeping your fleet in peak operating condition shouldn’t be so difficult. Machines sit idle for hours during “simple” oil changes. Technicians risk injury removing hot filters and climbing under or around the machines. Hot oil spills endanger your technicians AND the environment. The solution? The QuickFit^TM system.

The QuickFit^TM system is a simple and effective way to change oil, transmission and hydraulic fluids without taking too much time, risking unnecessary injury or facing environmental fines. The QuickFit^TM system utilizes the state-of-the-art PERT^TM process to Purge the filters, Evacuate the sump, then Refill the engine via its new filters and automatically Timestamp the service event.

QuickFit^TM fluid maintenance systeMS

With just one fitting per compartment, the QuickFit^TM system allows you to service most machines in less than 30 minutes. Filters are easily purged to eliminate hot oil spills, then automatically filled and new oil is completely filtered for improved continuous contamination control. The optional timestamp feature can automatically record the service and enables you to efficiently manage fluids for engines, transmissions and hydraulic reservoirs.

The QuickFit^TM system makes fluid maintenance cleaner, safer and faster for ALL makes and models… AND it’s repeatable, so it’s easier for you to schedule and plan routine PM services. Simply put, routine maintenance becomes routine again. Maintenance becomes simple. Productivity goes up. The risk of spills and contamination is virtually eliminated.

Purge

Evacuate

Refill

Purge, Evacuate, Refill fluids with the QuickFit Onboard Oil Change System

Safer
Up to 35% of service-related injuries on heavy equipment can be attributed to technicians climbing on, off or under the machine. With the QuickFit^TM system, there is virtually no need to climb under machines to remove belly guards or position/remove drain pans during routine maintenance. With ground-accessible service points, your technicians can purge old systems/filters, evacuate compartments and refill all from a single point. They also get a “live dipstick read” on the engine’s oil level without climbing up on the machine, starting the engine, shutting down and then topping off the levels. Fewer steps mean less chance of error and injury.

Cleaner
The QuickFit^TM system purges fluid from the system/filters and evacuates fluid from the compartments directly to final containment, preventing spills. It’s a completely closed loop, environmentally friendly process. No dripping filters. No drain pans. No intermediate containers.

Faster
The QuickFit^TM system saves you time and money while increasing machine availability by automating fluid management (PERT^TM). QuickFit^TM allows you to do a complete engine oil and filter change in less than 30 minutes, or a complete 250- or 500-hour service, including greasing, oil samples, and inspection, in about an hour. You reduce typical PM times by 1.5 to 2.5 hours per service. It also increases technician capacities… you can do more with your existing people.

Gain Hours of Machine Availability
Whether you’re maintaining a fleet of equipment in the field or you’re servicing it from a central location, QuickFit^TM systems will save you time and money:

Paybacks in 12 months or less
Service in less than 30 minutes
Gains 1.5 – 2.5 hours of machine availability, per service
Fits virtually all machines, new or old
Carries a comprehensive 12-month, unconditional parts warranty

Percentage Reduction in Safety Hazard & Consumables Use

Health, Safety & Environmental Impact

Multiple case studies have been conducted to compare the QuickFit^TM system with traditional service methodoligies. Spaghetti diagrams were used to track technicians’ movements and time spent on individual tasks. Results were consistent regardless of the machine or application in which the QuickFit^TM system was used:

Health & Safety Impact

91% reduction in time spent climbing up + down the machine because the QuickFit^TM fitting is at ground level, which results in fewer trips, slips and falls.

Since the oil is drained through the QuickFit^TM fitting, there is no crawling under the machine to handle the drain plug.

35% reduction in temperature of the oil and the oil filter canister because the service is done with the engine off, so there are no burns.

91% reduction in time spent bending + lifting and 79% reduction in walking to perform service means the technician is “less tired”.

Environmental Impact

QuickFit^TM is a closed-loop system, so there are NO spills.

90% reduction in rags and absorbents needed to clean up.

To learn more about purging an oil filter with traditional methods vs. QuickFit, watch this video. >>

For a visual demonstration of the QuickFit process, watch this video of the FLO QuickFit Onboard Oil Change Demo. >>

Easily Upgraded as Your Requirements Change

QuickFit^TM is part of a family of fluid management solutions, so as your equipment needs change, it’s not a problem. Need onboard, self-contained service capabilities to support remote sites or multiple field locations? QuickFit^TM systems can be upgraded to QuickEvac^TM or MultiVac^TM systems. The QuickEvac^TM system combines engine evacuation with engine pre-lubrication, making machines fully self-contained and ideal for remote location servicing. The MultiVac^TM system expands those capabilities to transmissions, differentials and hydraulic fluids for the maximum in remote service capability.

Download the QuickFit^TM Fleet Fluid Maintenance System Flyer

*QuickFit^TM, QuickEvac^TM, MultiVac^TM and PERT^TM are registered trade marks of RPM Industries LLC.

Keep your fleet out on the road making money. Contact us now to find out how small an investment is needed to start saving money and increase productivity.

For Total Lube Solutions Go With the FLO